Description

Feature:

• [Automatic induction]: The touchless hand disinfection machine is designed to nebulize hand sanitizer or alcohol, and provide automatic dosage of spray, which enables a quick and easy hand disinfection, avoiding the spread of bacteri-a caused by contact,achieving optimal hand hygiene.

• [Wall-mounted design without holes]: Easy to install.Wall mounted soap dispenser that works well in keeping the counter surface clutter free.

• [Long life span]: Using high-quality infrared and movement. Dual power supply mode of battery and DC power supply.(battery and DC power supply are both not included)

• [Auto continuous spray function]: When continuous induction, the sterilizer will spray once every 3 seconds and continuous spray 9 times, it will automatically stop, re-induction, and continue working.

• [Large capacity]: 1000ml capacity container. With visible liquid window and security key lock.Safe & durable ABS engineering plastics, low carbon, environmental protection.

Specification:

• Material: ABS

• White color

• Automatic induction drainage
  method: spray

• Product capacity: 1000ml

• Installation: wall-mounted

• Power: 4 x 2 batteries (not
  included) or DC power (not included)

• Item size: 261 x 121 x 107mm /
  10.3 x 4.8 x 4.2in

• Installation hole distance: 94 x
  80 x 72mm / 3.7 x 3.1 x 2.8in

The Packing list:

• 1 x sterilizer

• 4 x Screw

• 4 x Rubber plug

How to use:

• 1. Open the face shell.

• 2. Drill the installation hole in
  the installation position, insert the supplied rubber plug, and fasten the
  product to the installation position with the screws provided.

• 3. Pull out the battery cover in
  the direction of the arrow, insert 4 X C batteries (1.5V), and close the
  battery cover.

• If you want to use a DC power
  supply, you don’t need to install a battery. Just plug the DC power supply
  into a 220V power outlet and plug the other end into the DC connector inside
  the battery box.

• 4. Open the cap and pour the
  disinfectant / hand sanitizer into the bottle and close the cap. Large
  capacity 1000ml.

• 5. For the first use, press the
  pump head a few times with your hand to exhaust the air from the pump body.

• 6. It can be used normally when
  the upper case is closed. At this time, the indicator light is green,
  indicating that it is in working state.

• 7. During use, place your hand
  within 8cm/3.15in of the nozzle, and the machine will automatically spray
  the liquid once, about 1ml each time.

• If the hand does not leave the
  sensing range, the sterilizer will dispense liquid every 3 seconds, and it
  will automatically stop after 9 consecutive times, and the indicator light
  will be red to warn.

Tips:

• 1. There should be a 40cm/15.75in
  space under the machine, and do not install it in places exposed to strong
  sunlight and above strong reflective objects.

• 2. Prevent any object from
  blocking the outlet.

• 3. Keep the liquid inside the
  machine clean and free from other strip or block impurities.

• 4. Avoid direct exposure to the
  machine with water.

• 5. When disassembling, if there
  is liquid in the container, it is forbidden to lay the product flat to
  prevent the liquid from flowing out and soaking the motor and circuit board,
  causing damage.

• The liquid must be poured out
  before it can be laid flat.